Shining with a difference, the Dhorkra craft has been designed in the shape of a tribal woman playing the dhol(drum).The piece of brass grandeur reflects the simple life of village where music is the primary source of recreation. The inimitable piece of art created with the ancient lost wax technique speaks volume about the glorious Indian legacy. The beauty lies in the details. This breathtakingly beautiful statue can be a wonderful gift.
Origin: Dhokra is one of the oldest techniques used for metal casting over 4000 yearsDhokra is non–ferrous metal casting using the lost-wax casting technique. This sort of metal casting has been used in India for over 4,000 years and is still used.
Technique: There are two main processes of lost wax casting: solid casting and hollow casting. While the former is predominant in the south of India the latter is more common in Central and Eastern India. Solid casting does not use a clay core but instead a solid piece of wax to create the mould; hollow casting is the more traditional method and uses the clay core. The first task in the lost wax hollow casting process consists of developing a clay core which is roughly the shape of the final cast image. Next, the clay core is covered by a layer of wax composed of pure beeswax, resin from the tree Damara orientalis, and nut oil. The wax is then shaped and carved in all its finer details of design and decorations. It is then covered with layers of clay, which takes the negative form of the wax on the inside, thus becoming a mould for the metal that will be poured inside it. Drain ducts are left for the wax, which melts away when the clay is cooked. The wax is then replaced by the molten metal, often using brass scrap as basic raw material. The liquid metal poured in hardens between the core and the inner surface of the mould. The metal fills the mould and takes the same shape as the wax. The outer layer of clay is then chipped off and the metal icon is polished and finished as desired.
Use: The Dhokra art was involved in several process Hence, A single piece of Dhokra would usually take 2-3 months of time to make.The Dhokra art not only used for home and outdoor decorative purposes, but also it can be gifted as a corporate showpiece ,Christmas, new year and festive gift.